Is the slab level now?
Self Levelling Epoxy South Africa is poured rather than rolled, and finds its own level as it flows. That gives a seamless floor with no roller texture to hold dirt, which is why it is the usual choice where a floor has to be cleaned properly and look like one surface. Say how big the floor is and how flat it is now, and compare priced quotations.
Super easy & fast
- Know what a flow applied floor should cost, so you never pay too much.
- Send the same details to several flooring contractors, and quotes come back fast.
- From LEADERR APPROVED providers, vetted and backed by many verified 5-star reviews. Peace of mind that the slab is checked for flatness before resin is ordered.
Say how big the floor is, and get self levelling epoxy quotes.
Get the Best QuoteSelf Levelling Epoxy Prices
Ballpark figures so you can check a quotation.
| Item | Ballpark price |
|---|---|
| Grinding the slab back, per square metre | R45 - R120 |
| Self levelling epoxy, 2 mm, per square metre | R450 - R700 |
| Self levelling epoxy, 3 mm, per square metre | R600 - R900 |
| Anti slip aggregate in the top coat, per square metre | R60 - R150 |
| Moisture barrier primer, per square metre | R90 - R220 |
| Levelling a dished slab first, per square metre | R180 - R450 |
| Coving at the wall joint, per linear metre | R180 - R450 |
| A 200 square metre hall, 2 mm | R95,000 - R160,000 |
Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African industrial flooring rates. They are not our prices or quotations, and no provider is bound by them. Resin flooring is quoted on the FLOOR AREA and on the PREPARATION the slab needs, so confirm what each quotation includes, such as the grinding or shot blasting, the crack and joint repair, any levelling, the primer, the system thickness in millimetres, and what the coving, drains and line marking cost.
What a Flow Applied Floor Gives You
- No roller texture. A smooth surface with nowhere for dirt to sit.
- A seamless finish. One continuous surface rather than overlapping coats.
- Even thickness. The resin levels itself, so the film is consistent across the bay.
- A better look. The finish most showrooms and production halls are after.
- Grip where you want it. Aggregate broadcast into the top coat for wet areas.
What It Needs From the Slab
- Something close to flat. Resin levels small dips, it does not rebuild a floor.
- A dry slab. A flow applied film seals the surface and traps anything rising.
- Sound concrete. Laitance ground off, because the resin is only as fixed as that layer.
- Joints dealt with first. Cut, filled and decided on before the pour.
- A closed room. Wind, dust and direct sun all mark a wet resin surface.
How the Work Runs on Site
- Grind and vacuum. The surface opened and every speck of dust taken off.
- Repair and fill. Holes, spalls and joints put right while they are visible.
- Prime. A primer coat that seals the slab and gives the body something to grip.
- Pour and spike roll. Mixed, poured in bands and rolled through to release air.
- Leave it alone. The surface marks easily until it has cured.
Get a price for your own floor rather than a range.
Get the Best QuoteWhat Affects the Price
- The thickness. Two millimetres against three is most of the price difference.
- How flat the slab is. A dished floor needs levelling before resin, not instead of it.
- The area. A large open bay pours faster per square metre than a cut up room.
- The colour. Pale and bright colours need more pigment and more care over coverage.
- Moisture. A barrier primer where the slab has no membrane under it.
- The finish. Gloss, satin or an anti slip broadcast top coat.
What to Include in Your Request
- The address. Suburb and town, so a contractor knows whether they work there.
- The floor area. Square metres, paced out is fine.
- How flat it is now. Whether water pools anywhere, and how deep.
- What is on it. Bare concrete, old coating, screed or tiles.
- What the room is used for. It decides thickness, grip and colour.
- Photos. A low angle down the floor shows dips better than a photo from above.
Before You Appoint a Flooring Contractor
- Ask what the thickness is. Flow applied floors are sold by the millimetre.
- Ask whether the slab was checked for flatness. Resin follows the floor it is poured on.
- Ask about levelling. Whether it is in the price or a line that arrives later.
- Ask about grip. A smooth gloss floor is slippery wet, and that is a choice.
- Ask how long the room is out of use. Pouring is quick, curing is not.
- Ask who keeps the dust out. Dust landing on wet resin stays in the floor.
Self Levelling Epoxy FAQs
How much does self levelling epoxy cost in South Africa?
Commonly R450 to R700 a square metre at 2 mm and R600 to R900 at 3 mm, with preparation usually quoted on top at R45 to R120. A 200 square metre hall at 2 mm often lands between R95,000 and R160,000 once grinding and a primer are included.
Does it level an uneven floor?
It levels small undulations and leaves the shape of the floor alone. A slab that dips by more than a few millimetres needs a levelling screed first, and a contractor who promises that a 2 mm resin will fix a sloping floor is describing a different product.
How is it different from a rolled epoxy coating?
Thickness and finish. A rolled coating is a film a few hundred microns thick with roller texture in it; a flow applied floor is millimetres thick, seamless and smooth. The second costs more and lasts longer under traffic.
Is it slippery?
A smooth gloss finish is slippery when wet, which is fine in a dry showroom and wrong in a wash down area. Aggregate broadcast into the top coat gives grip, and the level of grip is something to agree before the floor is laid.
Can it go over an existing floor?
Over sound, well bonded concrete, yes, once it has been ground and primed. Over tiles, vinyl or a flaking old coating, no. What is under those has to be exposed first, because the new floor can only be as fixed as the layer it is bonded to.
A seamless floor is worth getting right first time, and Industrial Epoxy Flooring South Africa shows you what the common thicknesses cost before you choose one.
Related Services
Get the Best Quote, Fast
Client Reviews
Powered by leaderr

